Waste Plastic Recycling Pyrolysis Plant

Waste Plastic Recycling Pyrolysis Plant

Core Principles of Plastic Pyrolysis Machine

Heat the waste plastic in an oxygen-free sealed reactor at 450–520°C to pyrolyze and gasify the polymer. The pyrolysis oil undergoes multi-stage condensation to separate fuel oil, while non-condensable combustible gases are recovered for self-heating. Residual solids are discharged in small quantities, achieving waste plastic resource-based oil refining

Processable raw materials: PE plastic film, PP woven bag, HDPE barrel, PS foam, ABS plastic shell

Product output(PE/PP raw materials) according to Waste Plastic Recycling Pyrolysis Plant

1. Cracking fuel oil: 45% -60% (can be used for industrial boilers, generators, and diesel blending)

2. Gaseous gas: 15% -25% (for reheating heating, significantly reducing fuel costs)

3. Solid residue: 10% -18% (small amount of carbon powder, impurities)

Fully Automatic Continuous Plastic Pyrolysis Machine:

1. Annual production capacity: 3000-6000 tons of waste plastic

2. Operation mode:continuous feeding and discharging, PLC fully automatic control

3. Advantages: Only 2 manual workers, low energy consumption, environmental compliance standards, higher oil and gas recovery rate.

Composition of Pyrolysis Plant

1. Preprocessing unit: crusher

2. Cracking host: sealed reaction vessel, heating and combustion system

3. Condensation and oil separation system: condenser, oil storage tank

4. Exhaust gas purification system: water washing, desulfurization and dust removal

5. Automatic control system: PLC control cabinet, temperature and pressure monitoring instruments

Pyrolysis Plant flow: